Annual output of Zhejiang Yiya New Materials Co., Ltd. 2000 Thousands of square meters of environmentally friendly car body spray-painting film, 3800 10,000 square meters high viscosity and weather resistance PVC Environmental impact report for the adhesive film reconstruction project Environmental Impact Assessment Information Disclosure

1. Name and summary of construction project

project name: annual output 2000 Thousands of square meters of environmentally friendly car body spray-painting film, 3800 10,000 square meters high viscosity and weather resistance PVC Adhesive film reconstruction project

Construction unit: Zhejiang Yiya New Materials Co., Ltd.

Construction nature: remodel

Construction location: Zhejiang Province Jiaxing City Guangming Road, Tongxiang Economic Development Zone 1367 Number

Investment: 2300 Ten thousand yuan

Production system: No new employees will be added to the project, and a three-shift system will be implemented 24h hours of production, years of work 300 sky.

Total investment and economic benefits : project total investment 2300 Ten thousand yuan, estimated annual output value 31300 Ten thousand yuan, profit 2660 Ten thousand yuan, tax 950 Ten thousand yuan.

Planning construction progress : Book The project is expected to be 202 5 Year 12 It will be put into operation every month.

Construction content and scale : The total investment of this project 2300 Ten thousand yuan, using the company's existing land and factory buildings to eliminate the coating system 1 sets, exhaust gas treatment devices 1 sets, air compressors 1 station, retain coating system 1 Sets and slitting machines 8 Taiwan, rewinding machine 1 Table, punching machine 2 Taiwan, air compressor 1 Taiwan, newly purchased high-speed coating machine 2 Table and mold temperature machine 2 Taiwan, hot melt adhesive coating machine 1 Table, punching machine 5 Taiwan, air compressor 1 Taiwan, activated carbon exhaust gas treatment device 1 set, RTO Exhaust gas treatment facilities (including waste heat recovery boiler) 1 Set, high speed disperser 2 Table, cylinder 6 Taiwan and other related equipment, forming an annual output 2000 Thousands of square meters of environmentally friendly car body spray-painting film, 3800 Tens of thousands square meters of high viscosity and weather resistance PVC Adhesive film. Estimated annual output value 31300 Ten thousand yuan, profit 2660 Ten thousand yuan, tax 950 Ten thousand yuan.

2. Distribution of sensitive targets in major links around the project

This project is implemented in the factory area of ​​the enterprise, which is located in Zhejiang Province Jiaxing City Guangming Road, Tongxiang Economic Development Zone 1367 Number , the distribution of main sensitive points around is shown in the table 1 .

surface 1 project Summary list of major environmental protection goals in the assessment area

3. Overview of the possible impacts of the project on the environment

1. Water Environment

Technical transformation post-corporate Discharge domestic sewage, boiler concentrated drainage, pure water preparation concentrated water, steam condensation water, and cooling circulating water drainage. Among them, boiler concentrated drainage, pure water preparation concentrated water, steam condensation water, and cooling circulating water are relatively clean and can be directly included in municipal sewage after collection. Pipe Network, domestic sewage via septic tank The pretreatment reaches the "Comprehensive Wastewater Discharge Standard" ( GB8978-1996 ) Level 3 Standards and "Indirect Discharge Limits of Nitrogen and Phosphorus Pollutants in Wastewater from Industrial Enterprises" ( DB33/887-2013 ) standard, included in the municipal sewage pipe network, Depend on Tongxiang City Shenhe Water Affairs deal with limited liability company set medium processing , Tailwater discharge qiantang river .

Therefore, after the technical transformation, the corporate wastewater will not have an adverse impact on the pollution load and normal operation of the sewage treatment plant, and will have little impact on the surface water bodies in the area.

2. Ambient air

After the implementation of the technical transformation project, the breathing exhaust gas from the cylinder and the exhaust gas from the oven were collected. RTO After device processing and RTO combustion smoke set up 15 m high exhaust stack DA00 1 emission , exhaust gas Able to meet the "Comprehensive Emission Standards for Air Pollutants" ( GB16297-1996 ) Secondary standard emission standards for new pollution sources in ( Among them, the organic waste gas factor refers to the "Emission Standard of Air Pollutants for Industrial Painting Processes" ( DB33/2146 — 2018 )surface 1 Limit requirements ). After the implementation of the technical transformation project Exhaust gas from the glue temporary storage room, exhaust gas from the glue dispensing room, exhaust gas from the glue application head, and exhaust gas from the lower parts at the tail of the machine Collect via zeolite wheel After catalytic combustion treatment set up 15 m high exhaust stack DA00 2 emission , exhaust gas Able to meet the "Comprehensive Emission Standards for Air Pollutants" ( GB16297-1996 ) Secondary standard emission standards for new pollution sources in ( Among them, the organic waste gas factor refers to the "Emission Standard of Air Pollutants for Industrial Painting Processes" ( DB33/2146 — 2018 )surface 1 Limit requirements ) ; Hot melt adhesive waste gas is collected and treated with two-stage activated carbon. 15m high exhaust stack DA003 emissions, exhaust gas Able to meet the "Comprehensive Emission Standards for Air Pollutants" ( GB16297-1996 ) Secondary standard emission standards for new pollution sources in ( Among them, the organic waste gas factor refers to the "Emission Standard of Air Pollutants for Industrial Painting Processes" ( DB33/2146 — 2018 )surface 1 Limit requirements ) .

It is predicted that technological transformation New pollution sources added to the project will be discharged under normal conditions , Maximum hourly concentration and maximum standard share of short-term concentration contribution of each pollution factor ≤ 100% ; Methanol, toluene, ethyl acetate , non-methane total hydrocarbons Overlay current mass concentration , intended to replace pollution sources, The environmental protection objectives behind the proposed pollution sources under construction and the short-term concentration of the grid maximum point guarantee rate all meet the corresponding environmental quality standards. , The environmental impact meets the requirements of environmental functional zoning objectives. Technical transformation The short-term contribution concentration of all pollution sources in the project to air pollutants outside the factory boundary meets the environmental quality concentration limit, so there is no need to set an atmospheric environment protection distance at the factory boundary. The impact of technical transformation projects on the regional atmospheric environment is acceptable.

Also, Abnormal working conditions Various pollutants Hourly maximum contribution value concentration can reach environmental quality standard limits, but will result in a greater increase in the surrounding contribution concentration . This environmental impact assessment requires enterprises to regularly maintain and repair waste gas treatment devices in a timely manner to ensure waste gas removal efficiency and reduce the risk of pollution to the surrounding environment.

3. Acoustic environment

Technical transformation project After completion, after each noise source has been treated with noise reduction, the prediction results show that the day and night predicted values ​​of each factory boundary of the project comply with the "Environmental Noise Emission Standard for Industrial Enterprises at Factory Boundaries" ( GB12348-2008 )middle 3 kind The requirements of standard limits generally will not have obvious adverse effects on the quality of the surrounding acoustic environment.

4. Solid waste

Technical transformation project After implementation General waste packaging , waste scraps, waste ion exchange resin , Waste hot melt adhesive The sales materials recycling department recycles and utilizes comprehensively, Hazardous waste packaging, Waste glue , Waste cleaning fluid , Waste filter element, waste gloves, waste PTFE pipe, waste mineral oil, waste oil barrel, waste zeolite, waste catalyst, waste activated carbon Entrust a unit with hazardous waste disposal qualifications to receive and dispose of hazardous waste. Technical transformation project After implementation All solid waste generated has a reasonable and feasible disposal destination. As long as the construction unit strictly carries out classified collection and the storage place is designed and constructed in strict accordance with relevant regulations, good The "four prevention" requirements (windproof, rainproof, sunproof, and leakproof) are based on the basic principles of "reduction, resource utilization, and harmlessness" , on the basis of strengthening its own utilization, carry out reasonable disposal in accordance with regulations, Technical transformation The solid waste of the project will not have any adverse impact on the surrounding environment.

4. Main countermeasures and measures to prevent and mitigate adverse environmental impacts

The pollution prevention and control measures for this project are shown in the table 2 .

Surface 2 List of pollution prevention and control measures for this project

5. Basic conclusions of environmental impact assessment

Annual output of Zhejiang Yiya New Materials Co., Ltd. 2000 Thousands of square meters of environmentally friendly car body spray-painting film, 3800 Tens of thousands square meters of high viscosity and weather resistance PVC Adhesive film reconstruction project lie in Guangming Road, Tongxiang Economic Development Zone 1367 Number . Technical transformation The project complies with Township city "Three lines and one order" students Ecological environment zoning management and control plan requirements, can meet the pollutant emission standards stipulated by the country and the province, meet the total emission control indicators of major pollutants stipulated by the country and the province, meet the environmental quality requirements determined by the environmental function zone where the project is located, and meet the requirements of environmental risk prevention measures. . Therefore, from the perspective of environmental protection, the implementation of the project is feasible .

6. Scope and main matters of soliciting public opinions

1. Scope

Mainly targeting residents, enterprises and institutions surrounding the project construction site.

2 . Main matters

( 1 ) Opinions or views on the current environmental quality of the region

( 2 ) views on corporate environmental protection behavior

( 3 ) Opinions, views or requirements on the construction project

( 4 ) Requirements or opinions on the environmental protection work of local governments and relevant departments

7. Method and time of disclosure

This announcement will be made in the form of on-site posting on publicity boards in communities, streets and other units and in the form of website publishing.

At the time of public announcement between: 202 4 Year 5 moon 15 day ~202 4 Year 5 moon 29 day.

8. Specific forms for public opinions

public ( individual or group ) From the date of this announcement 10 Within working days ( 202 4 Year 5 moon 15 day ~202 4 Year 5 moon 29 date) by letter, phone or other means To contact the construction unit, environmental assessment unit, and environmental protection department, it is recommended that the group unit affix an official seal, and the individual should name and provide contact information. If the public needs additional relevant information, please contact the environmental assessment unit during the publicity period. The environmental impact assessment unit will truly record the public's opinions and suggestions in the Environmental Impact Report, and reflect the public's valuable opinions and suggestions to the construction unit, design unit and relevant departments of the project.

( 1 ) Name and contact information of the construction unit

Construction unit:   Zhejiang Yiya New Materials Co., Ltd.

address:   Guangming Road, Tongxiang Economic Development Zone, Jiaxing City, Zhejiang Province 1367 Number

Contact person:   Xu Min

contact number:

( 2 ) Name and contact information of environmental impact assessment agency

Environmental impact assessment unit:   Hangzhou Xianglong Environmental Protection Technology Co., Ltd.

address:   Hangxing Road, Gongshu District, Hangzhou City 708 Symbol Star Innovation Center 2 building 408 room

Contact person:   Chen Gong

contact number: 15700084827

( 3 ) Approval department name and contact information

Unit name: Jiaxing Municipal Ecological Environment Bureau Tongxiang branch

Unit Address: Kangmin East Road, Tongxiang City, Jiaxing City, Zhejiang Province 58 Number

contact number: 0573-88061994

[ Note ]  : The public is requested to provide detailed contact information as much as possible when expressing opinions.

Announcement issuing unit: Zhejiang Yiya New Materials Co., Ltd.

Release date: 202 Four Year five moon fifteen Day